Easton Muscle and Custom Logo

Archive for c10

1965 C10 Chevy Custom Pickup

This body…

1965 Chevy C10 Pickup

on this frame…

new frame for a 1965 Chevy C10 pickup

EMC’s newest project – a 1965 C10 Chevy Custom Pickup Truck

1965 Chevy C10 in metal shop

After being test fitted to the new Dropped and Bagged frame, the cab and bed were measured to make sure the GM LS3 engine and auto trans would not interfere with the old sheet metal. Jason then hand formed the new lower firewall and tunnel and welded it onto place.

1965 Chevy C10 new fabricated firewall1965 Chevy C10 new fabricated firewall

Custom hood hinges were  mounted to the cowl and hood for a clean look. Rust repair can be seen on the firewall.

1965 Chevy C10 start on new fender fabrication 1965 Chevy C10 start on new fender fabrication

Custom metal fender  wheel wells will be fitted next. Stay tuned!

Progress Update January 2020

Off again, on again, the truck cab is mated to the frame and is now a permanent fitment. Inner fender well in the front coming together, radiator fitted and the fuel tank and Air Bag Compressor/tank unit installed – ready for the hard part…..

1965 Chevy C10

January Update

1965 Chevy C10

 

 

Wiring the LS engine…. Jason made a “One off” junction box for a nice looking water proof install.

1965 Chevy C10 wiring junction box 1965 Chevy C10 wiring junction box

1977 C10 62K Miles

1977 C10 sold

1977 C10 – 62K Miles. From Georgia area. Mildly built 454 with an RV cam and intake. Long tube header, MSD ignition & new dual exhaust.  New Turbo 400 transmission. Rebuilt 3.73 rear. Original interior. Clean . Seat was recently recovered. Original paint. New disc brakes front & rear. New battery. Just serviced. suspension refresh. Mechanically as sound as they come! Read More→