on this frame…
EMC’s newest project – a 1965 C10 Chevy Custom Pickup Truck
After being test fitted to the new Dropped and Bagged frame, the cab and bed were measured to make sure the GM LS3 engine and auto trans would not interfere with the old sheet metal. Jason then hand formed the new lower firewall and tunnel and welded it onto place.
Custom hood hinges were mounted to the cowl and hood for a clean look. Rust repair can be seen on the firewall.
Custom metal fender wheel wells will be fitted next.
Progress Update January 2020
Off again, on again, the truck cab is mated to the frame and is now a permanent fitment. Inner fender well in the front coming together, radiator fitted and the fuel tank and Air Bag Compressor/tank unit installed – ready for the hard part…..Wiring the LS engine…. Jason made a “One off” junction box for a nice looking water proof install.